A complete discounted set of pull handle, handle and security rosette for entrance doors. When ordering, it is necessary to define the type of material in which the pull handle will be mounted and also the door opening.After ordering, it is possible to deliver the set in any other RAL color with a longer delivery time (usually 4-8 weeks).
Pull handle B6
Traditional elegant pull handle in black RAL 9005 color. The pull handle is designed for mounting in the sash of the entry door - not in the door infill panel.
The pull handle can be mounted to plastic or aluminium entry doors. The spacing of the pull handle legs is designed so that the pull handle does not bend. The pull handle rod is supplied as standard in a size 40 x 20 mm with a wall thickness of 1.5 mm.
A pull handle using with size 40 x 40 mm is used for longer dimensions. Pull handles are available in lengths of up to 2600 mm.
We keep these pull handles in stock for immediate delivery.
We are also able to provide you with a custom length pull handle as well. Please note that a lead time of 4 to 6 weeks will be required.
Handle K4
One-sided handle with square rosette under the handle and square rosette for the lock cylinder in black RAL 9005 design.
The rosette for the lock cylinder is attached to two rivet nuts using a metric screw - for aluminium doors. It is possible to exchange this connecting material for 4 self-tapping screws - for plastic doors. Self-tapping screws should be anchored in the steel
reinforcement of the plastic profile system. The square is inserted into the lock and then tightened with a nut. In this case, the square acts as an anchoring element to which the handle is attached. This method of attachment is suitable for door pull / handle combinations.
We do not recommend using door handles with door pulls that are not rated for single-sided mounting.
Rosette PZ57
Exterior rosette PZ 57 is supplied in RAL black color as standard. The rosette is does not cover the lock cylinder. It is suitable for common lock cylinders. The rosette is 12 mm tall. The lock cylinder should therefore not protrude more than 12 mm.
When mounting, it is necessary to pre-drill a hole with a diameter of 3 mm and a spacing of 48 mm. The rosette slides in and locks when the lock cylinder is inserted. The rosette cannot be removed without removing the lock cylinder (if the lock cylinder protrudes a minimum of 9 mm).
After ordering, it is possible to deliver the rosette in any other RAL color with a longer delivery time (usually 4-8 weeks).
My Wishlist
Login for partners
